Aluminum buckles have many specifications, including the panel width, thickness, and height of the folded edge of the sheet. The selection should be based on the characteristics of the bathroom at home. Aluminum profile buckled plate is divided into two kinds of surface perforation and plane. Surface perforation can be ventilated to absorb sound, buckled inside a layer of film cushion, moisture can be absorbed through the perforation by the film, so it is most suitable for more moisture kitchen and bathroom use. The market 600mm × 600mm microporous square plate, C150, C100 strip plate and 300 × 300, 300 × 600 aluminum buckle plate applied to the most widely.

Aluminum profile buckle plate is not all good or bad lies in the thin thickness, the key lies in the texture of the aluminum, general engineering aluminum buckle plate has 0.8 mm, or even thicker. Because of the quality of the aluminum itself, manufacturers want to make the aluminum buckle plate very thin instead of impossible, because the aluminum profile is not good, the plate is not a way to pull the thin very evenly, so, manufacturers can only do it to the thick. Therefore, identify the aluminum buckle plate, in addition to pay attention to the surface finish, but also to observe the plate thin and thick is uniform, pinch the plate with your hand to feel it, elasticity and toughness is good.